您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 13560-2009 烧结钕铁硼永磁材料

作者:标准资料网 时间:2024-05-23 02:09:28  浏览:8128   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:烧结钕铁硼永磁材料
英文名称:Materials for sintered neodymium iron boron permanent magnets
中标分类: 冶金 >> 有色金属及其合金产品 >> 稀有金属及其合金
ICS分类: 冶金 >> 有色金属产品 >> 其他有色金属产品
替代情况:替代GB/T 13560-2000
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2009-04-23
实施日期:2010-02-01
首发日期:1992-07-09
作废日期:
主管部门: 国家标准化管理委员会
提出单位:全国稀土标准化技术委员会
归口单位: 全国稀土标准化技术委员会
起草单位:包头稀土研究院
起草人:刘国征、赵增祺、赵瑞金、赵!静、王标、高兰
出版社:中国标准出版社
出版日期:2010-02-01
页数:12页
计划单号:20076115-T-303
适用范围

本标准规定了烧结钕铁硼永磁材料的要求、试验方法、检验规则和标志、包装、运输、贮存。
本标准适用于粉末冶金工艺生产的烧结钕铁硼永磁材料,供电子、电力、机械、医疗器械等领域制作永磁器件等用。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准中的引用而构成为本标准的条款。凡是注日期的引用文件,其后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议各方研究是否可使用这些文件的最新版本,凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T2828.1 计数抽样检验程序 第1部分:按接收质量限(AQL)检索的逐批检验抽样计划
GB/T3217 永磁(硬磁)材料磁性试验方法
GB/T8170 数值修约规则
GB/T9637 电工术语 磁性材料与元件

所属分类: 冶金 有色金属及其合金产品 稀有金属及其合金 冶金 有色金属产品 其他有色金属产品
下载地址: 点击此处下载
【英文标准名称】:Automaticelectricalcontrolsforhouseholdandsimilaruse-Part2-3:Particularrequirementsforthermalprotectorsforballastsfortubularfluorescentlamps
【原文标准名称】:家用和类似用途的自动电控制器.第2-3部分:管式荧光灯镇流器热保护器的特殊要求
【标准号】:IEC60730-2-3-2006
【标准状态】:现行
【国别】:国际
【发布日期】:2006-10
【实施或试行日期】:
【发布单位】:国际电工委员会(IX-IEC)
【起草单位】:IEC/TC72
【标准类型】:()
【标准水平】:()
【中文主题词】:自动;自动控制系统;镇流器;分类;压缩机;控制装置;控制设备;定义;耐久性;电气器具;电镇流器;电控制设备;家用电器;电气工程;荧光灯;全封装;密封的;家用设备;家用;检验;照明系统;电动压缩机;电机压缩机;电动机保护;过热;过热保护装置;持久性;保护设备;保护装置;保护电机开关;安全要求;规范(验收);试验;热的;热防护器;管形灯
【英文主题词】:Automatic;Automaticcontrolsystems;Ballasts;Classification;Compressors;Controldevices;Controlequipment;Definitions;Durability;Electricappliances;Electricballasts;Electriccontrolequipment;Electrichouseholdappliance;Electrichouseholdappliances;Electricalengineering;Electricalhouseholdappliances;Fluorescentlamps;Fullyenclosed;Hermetically;Householdequipment;Householduse;Inspection;Lightingsystems;Motorcompressors;Motorprotection;Overheating;Overheatingprotection;Permanency;Protectiondevices;Protectivedevices;Protectivemotorswitch;Safetyrequirements;Specification(approval);Testing;Thermal;Thermalprotectors;Tubularlamps
【摘要】:ThispartofIEC60730appliestotheevaluationofthermalprotectorsforballastsfortubularfluorescentlamps.ThisstandardappliestothermalprotectorsusingNTCorPTCthermistors,additionalrequirementsforwhicharecontainedinAnnexJ.RequirementsconcerningthetestingofthecombinationofballastsandthermalprotectorsaregiveninIEC61347-1.1.1.1Thisstandardappliestotheinherentsafety,totheoperatingvalues,operatingtimes,andoperatingsequenceswheresuchareassociatedwithequipmentsafety,andtothetestingofthermalprotectorsusedtoprotectballastsfortubularlampsfromoverheating.ThisstandardappliestothermalprotectorsforballastswithinthescopeofIEC61347-2-8.ThermalprotectorscoveredbythisstandardmaybesuitableforballastsforotherdischargelampssuchasballastsunderthescopeofIEC61347-2-9.Throughoutthisstandard,theword"protector"means"self-resettingthermalballastprotector".1.1.2Thisstandardisnotapplicabletoothermeansusedtoprotectballasts.1.1.3Thisstandarddoesnotapplytoamanualdeviceforopeningthecircuit.Thisstandardappliestoprotectorsforusewithballastsforuseona.c.suppliesupto690Vat50Hzor60Hz.Thisstandarddoesnottakeintoaccounttheresponsevalueofanautomaticactionofacontrol,ifsucharesponsevalueisdependentuponthemethodofmountingthecontrolintheequipment.Wherearesponsevalueisofsignificantpurposefortheprotectionoftheuserorsurroundings,thevaluedefinedintheappropriatehouseholdequipmentstandardorasdeterminedbythemanufacturerapplies.
【中国标准分类号】:K74
【国际标准分类号】:29_140_99;97_120
【页数】:29P;A4
【正文语种】:英语